References

Allen DM (1986) The principles and practice of photochemical machining and photoetching. Inst of Physics Pub Inc., pp 1-18 Allen MG, Mehregany M, Howe RT, Senturia SD (1987) Microfabricated structures for the in situ measurement of residual stress, Young's modulus and ultimate strain of thin films, Appl. Phys. Lett. 51:241-243 Alley RL, Cuan GJ, Howe RT, Komvopoulos K (1988) The effect of release etch processing on surface microstructure stiction. echnical Digest of the Solid-State Sensor and Actuator Workshop, Hilton Head Island, pp 202-207 Allongue P, Kieling VC, Gerischer H (1993) Etching of Si in NaOH solutions, Part I and II,

J. Electrochem. Soc. 40:1009-1018 and 40:1018-1026 Ammar ES, Rodgers TJ (1980) UMOS transistors on (110) silicon, IEEE Trans. Electron

Devices ED-27:907-914 Bassous E, Taub HH, Kuhn L (1977) Ink jet printing nozzle arrays etched in silicon, Appl.

Phys. Lett. 31:135-137 Boivin LP (1974) Thin film laser-to fiber coupler, Appl. Opt. 13:391-395 Bromley EI, Randall JN, Flanders DC, Mountain RW (1983) A technique for the determination of stress in thin films, J. Vac. Sci. Technol. B1:1364-1366. Campbell DS, (1970) Mechanical properties of thin films. In: Maissel L, Glang R (eds.) ,

Handbook of Thin Film Technology, McGraw-Hill Chang S, Eaton W, Fulmer J, Gonzalez C, Underwood B, Wong J, Smith RL (1991) Micro-mechanical structures in amorphous silicon. Proc. of the 6th Int. Conf. on Solid-State Sensors and Actuators (Transducers 91), San Francisco, pp 751-754 Chou PC, Pagano NJ (1967) Elasticity: tensor, dyadic, and engineering approaches. Dover

Publications Inc., New York Core TA, Tsang WK, Sherman SJ (1993) Fabrication technology for an integrated surface micromachined sensor, Solid State Technol. 36:39-47 Diem B, Delaye MT, Michel F, Renard S, Delapierre G (1993) SOI(SIMOX) as a substrate for surface micromachining of single crystalline silicon sensors and actuators. Proc. of the Int. Conf. on Solid-State Sensors and Actuators, Japan, pp 233-236 Editorial (2004) Analog Devices combines micromachining with BICMOS, Semiconductor International, available at http://www.reed-electronics.com

Editorial (1974) Transducers, pressure and temperature catalog. White paper, National

Semiconductor, Sunnyvale, USA Editorial (1977) Thermal character print head. Technical Report, Texas Instruments, Austin Elwenspoek M, Weigerink R (2000) Mechanical microsensors. Springer, Germany Fan LS, Muller RS, Yun W, Huang J, Howe RT (1990) Spiral microstructures for the measurement of average strain gradients in thin films, Proc. of the IEEE Micro Electro Mechanical Systems, (MEMS 90), pp 177-181 Fan LS, Tai YC, Mulller RS (1988) Integrated movable micromechanical structures for sensors and actuators, IEEE Trans. Electron Devices 35:724-730 Gabriel K, Jarvis J, Trimmer W (1989) Small machines, large opportunities. A report on the emerging field of microdynamics, National Science Foundation Gad-el-Hak M (2002) The MEMS handbook. CRC press, pp 200-211 Greenwood JC (1969) Ethylene Diamine-Cathechol-Water mixture shows preferential etching of p-n junction, J. Electrochem. Soc, 116:1325-1326 Greenwood JC (1984) Etched silicon vibrating sensor, J. Phys. E, Sci. Instrum. 17:650-652 Guckel H, Burns DW, Nesler KC, Rutigliano CR (1987) Fine grained polysilicon and its application to planar pressure transducers. Proc. of the 4th Int. Conf. on Solid-State Sensors and Actuators (Transducers 87), Tokyo, pp 277-282 Hallas CE (1971) Electropolishing silicon, Solid State Technology 14:30-32 Harris TW (1976) Chemical milling. Clarendon Press, Oxford

Hermansson K, Lindberg U, Hok B, Palmskog G (1991) Wetting properties of silicon surfaces. Proc. of the 6th Int. Conf. on Solid-State Sensors and Actuators (Transducers 91), San Francisco, pp 193-196 Hoffman RW (1976) Mechanical properties of non-metallic thin films: Physics of nonmetallic thin films (NATO Advanced Study Institutes Series: Series B, Physics). In: Dupuy CHS, Cachard A ( eds), Plenum Press, pp 273-353 Hoffmeister W (1969) Determination of the etch rate of silicon in buffered HF using a 31 Si tracer method, Int. J. Appl. Radiation and Isotopes 2:139-144 Howe RT, (1995b) Recent advances in surface micromachining. Technical Digest of the

13th Sensor Symposium, Tokyo, pp 1-8 Hu JZ, Merkle LD, Menoni CS, Spain IL (1986) Crystal data for high-pressure phases of silicon, Phys. Rev. B 34:4679-4684 Jaccodine RJ, Schlegel WA (1966) Measurements of strains at Si-SiO2 interface, J. Appl. Phys. 37:2429-34

Jian L, Destaa YM (2003) SU-8 based deep x-ray lithography/LIGA: Micromachining and microfabrication process technology. Proceedings of SPIE, pp 4979-4983 Kaminsky G (1985) Micromachining of silicon mechanical structures, J. Vac. Sci. Technol. B3:1015-1024

Keller CG (1998) Microfabricated high aspect ratio silicon flexures: Hexsil, RIE, and KOH

etched design & fabrication, MEMS Precision Instruments Pub. Kern W, Deckert CA (1978) Chemical etching in thin film processes. In: Vossen JL, Kern

W (eds), Academic Press, Orlando Krulevitch PA (1994) Micromechanical investigations of silicon and Ni-Ti-Cu thin films.

Ph.D. thesis, University of California at Berkeley Lee JB, Chen Z, Allen MG, Rohatgi A, Arya R (1995) A miniaturised high-voltage solar cell array as an electrostatic MEMS power supply, J. Microelectromech. Syst. 4:102108

Legtenberg R, Elders J, Elwenspoek M (1993) Stiction of surface micromachined structures after rinsing and drying: model and investigation of adhesion mechanisms. Proc. Int. Conf. on Solid-State Sensors and Actuators (Transducers 93), pp 198-201

Linde H, Austin L (1992) Wet silicon etching with aqueous amine gallates, J. Electrochem. Soc. 139:1170-1174

Lober TA, Howe RT (1988) Surface micromachining for electrostatic microactuator fabrication. Technical Digest of the Solid State Sensor and Actuator Workshop, Hilton Head Island, pp 59-62 Luder E (1986) Polcrystalline silicon-based sensors, Sensors and Actuators A 10:9-23 Madou MJ (1997) Fundamentals of microfabrication. CRC Press, New York Madou MJ, Morrison SR (1989) Chemical sensing with solid state devices. Academic Press, New York

Marco S, Samitier, Ruiz O, Morante JR, Esteve-Tinto J, Bausells J (1991) Stress measurements of SiO2-Polycrystalline silicon structures for micromechanical devices by means of infrared spectroscopy technique. Proc. of the 6th Int. Conf. on Solid-State Sensors and Actuators (Transducers 91), San Francisco, pp 209-212 Mastrangelo CH, Hsu Ch (1993) Mechanical stability and adhesion of microstructures under capillary forces-Part II: Experiments, J. Microelectromech. Syst. 2:44-55 Mastrangelo CH, Hsu CH (1993a) Mechanical stability and adhesion of microstructures under capillary Forces-Part I: Basic Theory, J. Microelectromech. Syst. 2:33-43 Maszara W, Jiang BL, Yamada A, Rozgonyi GA, Baumgart H, Kock, AJR (1991) Role of surface morphologyin wafer bonding, J. Appl. Phys. 69:257 Mehregany M, Senturia SD (1998) Anisotropic etching of silicon in hydrazine, Sensors and

Actuators A 13:375-390 Michalicek AM (2004) Introduction to MEMS, http://mems.colorado.edu/c1.res.ppt /ppt/g.tutorial

Middlehoek S, Dauderstadt U (1994) Haben mikrosensoren aus silizium eine zukunft?

technische rundschau, Technical Report, pp 102-105 Monk DJ, Soane DS, Howe RT (1992) LPCVD silicon dioxide sacrificial layer etching for surface micromachining. Proc. of the National Conf. on smart materials fabrication and materials for microelectromechanical systems, San Francisco, pp 303-310 Monk DJ, Soane DS, Howe RT (1994a) Hydrofluoric acid etching of silicon dioxide sacrificial layers. Part II. Modeling, J. Electrochem. Soc. 14:270-274 Murarka SP, Retajczyk TFJ (1983) Effect of phosphorous doping on stress in silicon and polycrystalline silicon, J. Appl. Phys. 54:2069-2072 Nathanson HC, Wickstrom RA (1965) A resonant-gate silicon surface transistor with high-

Q band-pass properties, Applied Physics Letters 7:84-86 National Materials Advisory Board (1997) Microelectromechanical systems: Advanced materials and fabrication methods, National Academic Press Washington, pp 1-61 Nishioka T, Shinoda Y, Ohmachi Y (1985) Raman microprobe analysis of stress in Ge and

GaAs/Ge on SiO2-coated silicon substrates, J. Appl. Phys. 57:276-81 Noworolski JM, Klaassen ME, Logan J, Petersen K, Maluf N (1995) Fabrication of SOI wafers with buried cavities using silicon fusion bonding and electro-chemical etchback. Proc. of the Int. Conf. on Solid-State Sensors and Actuators (Transducers 95), Stockholm, pp 71-74 Obermeier E (1995) High temperature icrosensors based on polycrystalline diamond thin films. Proc. of the 8th International Conference on Solid-State Sensors and Actuators (Transducers 95), Stockholm, pp 178-181 Obermeier E, Kopystynski P (1992) Polysilion as a material for microsensor applications,

Sensors and Actuators A 30, 149-155 O'Neill P (1980) A monolithic thermal converter, Hewlett-Packard J. 31:12-13 Palik ED Faust JW, Gray HF, Green RF (1982) Study of the Etch-Stop Mechanism in Silicon, J. Electrochem. Soc. 129:2051-2059

Park J, Allen M (1998) Development of magnetic materials and processing techniques applicable to integrated micromagnetic devices, J. Micromech. Microeng. 8:307-316 PeetersE (1994) Process development for 3D silicon microstructures, with application to mechanical sensor design. Ph.D. thesis, Catholic University of Louvain Petersen KE (1982) Silicon as a mechanical material. Proc. IEEE, 70:420-457 Pfann WG (1961) Improvement of semiconducting devices by elastic strain, Solid State Electron. 3:261-267

Robbins H, Schwartz B (1960) Chemical etching of silicon-II: The system HF, HNO3,

H2O, and HC2C3O2, J. Electrochem. Soc. 107:108-111 Rodgers TJ Hiltpold WR, Frederick B, Barnes JJ, Jenne FB, Trotter JD (1977) VMOS

memory technology, IEEE Transaction on Solid-State Circuits SC12:515-523 Schwartz B, Robbins H (1976) Chemical etching of silicon-IV, Etching Technology, J.

Electrochem. Soc. 123:1903-1909 Singer P (1992) Film stress and how to measure it, Semicond. Int. 15:54-58 Smith CS (1954) Piezoresistance effect in germanium and silicon, Phys. Rev. 94:42-49 Tang WCK (1990) Electrostatic comb drive for resonant Sensor and actuator applications.

Ph.D. thesis, University of California at Berkeley Tenney AS, Ghezzo M (1973) Etch rates of doped oxides in solutions of buffered HF, J.

Electrochem. Soc. 120:1091-1095 Tuck B (1975) The chemical polishing of semiconductors, J. Mater. Sci. 10:321-339 Tuft ON, Chapman PW, Long D (1962) Silicon diffused-element piezoresistive diaphragms, J. Appl. Phys. 33:3322 Turner DR, (1958) Electropolishing silicon in hydrofluoric acid solutions, J. Electrochem. Soc. 105:402-408

Uhlir A (1956) Electrolytic shaping of germanium and silicon, Bell Syst. Tech. J. 35:333347

Vinci RP, Zielinski EM, Bravman JC (1995) Thermal strain and stress in copper thin films Voronin VA, Druzhinin AA, Marjamora II Kostur VG, Pankov JM (1992) Laser-

recrystallised polysilicon layers in sensors, Sensors and Actuators A 30:143-147 Waggener HA, Krageness RC, Tyler AL (1967) Two-way etch, Electronics 40:274 Wong SM (1978) Residual stress measurements on chromium films by X-ray diffraction using the sin2 Y method, Thin Solid Films 53:65-71 Xu YB, Okubo T, Sadakata M (1997) Synthesis of ultrafine B-Sic particles from siox (X=0,1, 2) powders and C2h2, J. of Chem. Eng. of Japan 30:662-668

Was this article helpful?

0 0
Brain Blaster

Brain Blaster

Have you ever been envious of people who seem to have no end of clever ideas, who are able to think quickly in any situation, or who seem to have flawless memories? Could it be that they're just born smarter or quicker than the rest of us? Or are there some secrets that they might know that we don't?

Get My Free Ebook


Post a comment